Turn Signal/Hazard Warning
Flashers
HEX0071
Turn signal/hazard warning flashers are
used to confirm that the vehicle's
external turn signal lights or hazard
warning flashers are all working
correctly.
If the green arrow does not flash when
you activate the turn signal or press the
hazard warning switch, then you should
check the fuses and light bulbs, and
replace them if necessary.
— If the vehicle speed exceeds 20
km/h, this light will stay on, and at
the same time the warning buzzer
will continue to sound for a period
of time.
Caution
These indicators are essential for
safe driving.
If the bulb in the turn signal light or
hazard warning flasher is blown, it
must be replaced immediately.
If these indicators are not kept in
good working condition, this may
lead to accidents resulting in
personal injury and damage to your
vehicle or other property.
Caution
If the flashing time is shorter than
normal, it indicates that the turn
signal light bulbs have blown and
need to be replaced.
64 Instruments and Controls
To Next Page
Loading...
Need help?
General
