IInntteerrrruuppttiioonn ooff ppoowweerr
ssuuppppllyy
In the event of an interruption of
power supply, the selector lever
cannot be moved out of the PP
position. The ignition key cannot be
moved out of the ignition lock.
If the battery is discharged, start the
vehicle using jump cables 204.
If the battery is not the cause of the
fault, release selector lever and
remove the ignition key from the
ignition lock.
RReelleeaassee sseelleeccttoorr lleevveerr
1. Apply the parking brake.
2. Open cover to the right of the
selector lever.
3. Insert a screwdriver in the hole
until the lever is unlocked, move
the selector lever out of PP position
and move to the NN position.
4. Close cover.
To Next Page