Chevrolet Spin - Page 200

220000 VVeehhiiccllee ccaarree
ground clearance, stopping
distance, body clearance and
speedometer reliability.
WWhheeeell cchhaannggiinngg
All vehicles are equipped with a spare
wheel .
Make the following preparations and
observe the following information:
■ Park the vehicle on a level, firm and
non-skid surface. The front wheels
must be in the positioned straight-
ahead.
■ Apply the parking brake and
engage first gear, reverse gear or
PP.
■ Remove the spare wheel.
■ Never change more than one wheel
at once.
■ If the ground on which the vehicle
is standing is soft, a solid board
(maximum 1 cm thick) should be
placed under the jack.
■ No people or animals may be in the
vehicle when it is jacked-up.
■ Never crawl under a jacked-up
vehicle.
1. Alloy wheels and wheel covers:
Install the wheel wrench ensuring
that it locates securely and loosen
each wheel nut by half a turn.
■ Do not start the vehicle when it is
raised on the jack.
■ Clean wheel nuts and thread with a
clean cloth before mounting the
wheel.
WWaarrnniinngg
Do not grease wheel nut and
wheel nut cone.
■ Use the jack only to change wheels
in case of puncture.