0
License Plate Lamps
0
Instrument Panel Lights
Rotate the knob to the right again, to the master
lighting symbol, to turn on all the lamps listed as
well as the headlamps.
Rotate the knob to the left, to
OFF,
to turn off
your lamps.
Rotate the thumb wheel next to the knob up to adjust
instrument panel lights. Rotate the thumb wheel up to
the first notch to return the radio display and gearshift
indicator LED display to full intensity when the
headlamps or parking lamps are on.
To
turn on the dome
lamps (with the vehicle doors closed) rotate the thumb
wheel up to the second notch position.
You can switch your headlamps from high
to
low beam
by pulling on the turn signalhigh-beam lever.
A
circuit breaker protects your headlamps. If you have
an electrical overload, your headlamps will flicker
on
and off. Have your headlamp wiring checked right away
if this happens.
Headlamps-On Reminder
A buzzer will sound when your headlamps are turned on
and your ignition is in
OFF,
LOCK or ACCESSORY. If
you need to use your headlamps when the ignition
switch
is
in
OFF,
LOCK or ACCESSORY, the buzzer
can be turned off by turning the thumb wheel next to the
parkingheadlamp switch all the way down.
Daytime Running Lamps
Daytime Running Lamps (DRL) can make it easier for
others to see the front
of
your vehicle during the day.
DRL can be helpful in many different driving
conditions, but they can be especially helpful in the
short periods after dawn and before sunset.
The DRL system will make your headlamps come on at
a reduced brightness when:
0
the ignition is on,
the headlamp switch is off and
0
the parking brake is released.
When the DRL are
on,
only your headlamps will be on.
The taillamps, sidemarker and other lamps won’t
be
on.
Your instrument panel won’t be lit up either.
2-41
To Next Page
Loading...
Need help?
General
