1.
2.
3.
Make the belt as long as possible by tilting the latch
plate and pulling it along the belt.
Put the restraint on the seat.
Run
the vehicle’s safety belt through or around the
restraint. The child restraint instructions will show
you how.
4.
5.
Buckle the belt. Make sure the release button is
positioned
so
you would be able to unbuckle the
safety belt quickly if you ever had
to.
To
tighten the belt, pull its free end while you push
down on the child restraint.
If
you’re using a
forward-facing child restraint, you may find it
helpful to use your knee to push down
on
the child
restraint as you tighten the belt.
1-57
To Next Page
Loading...
Need help?
General
