EasyManua.ls Logo

Chialstar Q5 - 3. Pairing; 3.1 Bluetooth; 3.2 FM Radio; 3.3 Usb

Default Icon
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Pairing
3.1 Bluetooth:
(1)Keep press the MODE button until the LED light blinks with “Bluetooth Mode”voice
(2)Initiate Bluetooth of mobile phone/other devices
(3)Select "Q5" (some mobile phone need to input PIN 0000 as password), and the
speaker will automatically connect with your phone/ other devices
3.2 FM Radio:
(1)Keep press the MODE button until the LED light blinks with FM Mode voice
(2)Short press @ to search FM channels
3.3 USB
(1) Make sure the speaker has been switched on
(2) Plug USB cable (Included) into the USB port of speaker
(3) The speaker will get into Aux In mode automatically with Aux In mode voice
3.4 Micro SD
(1) Before inserting Micro SD make sure the speaker has been switched on
(2) Insert Micro SD into the slot,the speaker will get into Micro SD mode automatically
with Micro SD Mode voice.
3.5 AUX IN
(1) Plug 3.5mm audio cable(Included) into the 3.5 mm charging port of speaker; plug the
other side of 3.5mm audio cable into the audio device (PC/MP3/MP4/Mobile phone)
(2) The speaker will get into Aux inmode automatically with Aux in mode voice
4. Charging
This speaker uses a non-detachable built-in rechargeable battery. In order to prevent
damage of the speaker, please do not remove the battery.
(1)Before charging, make sure the speaker has been switched off.
(2)Plug USB cable (Included) into the Micro USB port of speaker , plug the other side of
USB cable into USB charging or other charging device; charging will be start and the red
light remains blink on the speaker
(3)The red light will be out when fully charged
*The indicator light will flash quickly and have warning voice when sound bar on low battery