Chicago Electric 4095

To Next Page

RECIPROCATING SAW - 4.5 AMP

Model 04095

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

2003 by Harbor Freight Tools

portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353.

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS

AND INSTRUCTIONS BEFORE USE.

Manual Revised 02/05

Main Page

Need help?

Do you have a question about the Chicago Electric 4095 and is the answer not in the manual?

Summary

Product Specifications

General Safety Rules

Work Area Safety

Keep work area clean, well-lit, and free of hazards.

Electrical Safety

Personal Safety

Tool Use and Care

Service Procedures

Specific Safety Rules

Grounding Information

Grounded Tools with Three Prong Plugs

Explains grounding requirements for tools with three-prong plugs.

Double Insulated Tools

Extension Cords

Recommended Minimum Wire Gauge for Extension Cords

Symbology

Unpacking Instructions

Assembly and Operating Instructions

Installing the Saw Blade

Steps to select and securely install the saw blade into the tool.

Adjusting the Depth of Cut

Operating Procedures

Trigger Lock Mechanism

Details on using the trigger lock for extended operation.

Safe Operation Steps

Ensures safe start-up and operation of the reciprocating saw.

Inspection, Maintenance, and Cleaning

Parts List

Assembly Diagram