Chicago Electric 42818 User Manual

COMPOUND SLIDE MITERCOMPOUND SLIDE MITER
COMPOUND SLIDE MITERCOMPOUND SLIDE MITER
COMPOUND SLIDE MITER
SASA
SASA
SA
W - 12 INCHW - 12 INCH
W - 12 INCHW - 12 INCH
W - 12 INCH
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2002 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
42818

Chicago Electric 42818 Specifications

General

Type	Circular Saw
Blade Diameter	7-1/4 inches
Voltage	120V
Maximum RPM	5000 RPM
No Load Speed	5000 RPM
Blade Size	7-1/4 inches
Arbor Size	5/8 inch

Summary

Specifications

General Safety Warnings and Precautions

Work Area and Personal Safety

Guidelines for maintaining a clean work area and personal protective equipment.

Specific Safety Precautions for Miter Saw Use

Crucial safety measures specifically for operating the compound slide miter saw.

Unpacking and Installation

Unpacking Procedures

Steps to check for all parts after unpacking the miter saw.

Workbench Installation

Guide on how to securely mount the miter saw to a workbench.

Accessory Fences and Kerf Board Adjustment

Auxiliary Wood Fence Installation

Instructions for mounting an auxiliary wood fence for safer cutting.

Positioning Kerf Boards

Procedure for adjusting kerf boards to prevent blade contact.

Preparation to Cut Stock

Stock Placement and Clamping

Proper methods for laying stock on the base and using the vertical clamp.

Adjusting Saw Blade Angles

Steps for setting vertical and miter/bevel angles for cutting.

Cutting Stock

Standard Cutting Procedure

Step-by-step guide for making a cut with the miter saw.

Slide Cutting Technique

Instructions for performing slide cuts for larger workpieces.

Replacing the Saw Blade

Replacing Motor Brushes

General Maintenance

Saw Blade Perpendicular to Fence Adjustment

Bevel Stop to 90 Degrees

Parts List

Assembly Drawing

Assembly Drawing (Continued)