Chicago Electric 45338 User Manual

HAMMER DRILL - 1/2 INCH
VARIABLE SPEED - REVERSIBLE
45338
SET UP AND OPERATING INSTRUCTIONS
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2003 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 08l

Chicago Electric 45338 Specifications

General

Chuck Size	3/8 inch
Amperage	4.5 amps
Speed	0-2800 RPM
Power Source	Corded Electric
Voltage	120 volts

Summary

Set Up and Operating Instructions

Important Safety Information

General Power Tool Safety Warnings

Read all safety warnings and instructions. Covers work area, electrical, and personal safety precautions for safe operation.

Drill and Impact Drill Safety Warnings

Specific safety advice for operating drills, including ear protection, auxiliary handles, and cord safety.

Vibration Safety

Grounding

Grounded Tools

Explanation of three-prong plugs and outlets for proper grounding to prevent electric shock.

Double Insulated Tools

Information on tools with two-prong plugs that do not require grounding due to double insulation.

Extension Cords

Guidelines for selecting and using extension cords, including gauge, length, and outdoor use.

Symbology

Explanation of common symbols found on tools and in manuals, such as UL, CSA, and V~.

Specifications

Unpacking

Instructions on how to unpack the tool and check for damaged or missing parts.

Instructions for Putting into Use

Guidance for initial setup and preparation before operating the tool.

Tool Set Up

General Operating Instructions

Step-by-step guide on operating the hammer drill, including bit insertion, switch usage, and speed adjustment.

Maintenance and Servicing

Cleaning, Maintenance, and Lubrication

Procedures for inspecting, cleaning, and maintaining the tool for safe and optimal performance.

Parts List

Limited 90 Day Warranty