Page 2SKU 90604 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Item Description
Power Consumption 110 / 120 VAC, 60 Hz, 30 amps
Power Cord 16 AWG x 3, 7 feet; Three prong plug; UL Listed
Switch Toggle, UL Listed
Quick Charge 100 amps
Output Voltage 6, 12, and 24 VDC
Meter Scales Amps: 0~20A and 0~30A; Volts: 0~30V
Features Dual dial settings
Thermal overload projection
Polarity protection
Trickle charge, Jump start, and Quick charge
Weight 25.65 lbs.
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instruc-
tions listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools create sparks which may ignite the
dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions
can cause you to lose control. Protect others in the work area from debris such as
chips and sparks. Provide barriers or shields as needed.
Electrical Safety
4. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and
refrigerators. There is an increased risk of electric shock if your body is grounded.
REV 07/04
To Next Page
Loading...
