To Next PageTo Next Page
Need help?Do you have a question about the Chicago Electric Power Systems 95596 and is the answer not in the manual?
General| Brand | Chicago Electric |
|---|---|
| Model | Power Systems 95596 |
| Category | Inverter |
| Language | English |
Emphasizes reading all instructions to prevent shock, fire, or injury.
Explains safe use of grounding prongs and avoiding modifications to plugs.
Details the use of polarized plugs for double insulated tools.
Warns about electric shock risk from improper grounding wire connection.
Connects only to 12 VDC batteries, prohibits positive ground systems.
Details connecting the ground wire to the inverter and a grounded metal surface.
Recommends deep cycle batteries; notes special care for Gel/AGM.
Provides chart for selecting battery capacity based on desired runtime.
Lists safety precautions before assembling battery banks.
Explains connecting batteries in parallel, not series, to avoid electrocution.
Illustrates parallel connection of 12V batteries for increased capacity.
Plug 120V devices into receptacles, respecting 2000W limit.
Turn the inverter's power switch to the "ON" position.
Turn on the connected tool/appliance and check for alarms.
Inspect inverter condition, wiring, and parts before each use.
Addresses low battery alarm indicating voltage below 10.6 VDC; requires recharging.
Suggests recharging or replacing the battery if low battery alarm is constant.
Advises reducing load or increasing input voltage if output voltage is low.
Guides on checking power switch, thermal shutdown, and ventilation for no power.
Provides instructions for safely checking and replacing fuses (40 A rated).
