To Next PageTo Next Page
Need help?Do you have a question about the Chicago Electric 54516 and is the answer not in the manual?
General| Brand | Chicago Electric |
|---|---|
| Model | 54516 |
| Category | Inverter |
| Language | English |
Maintain a clean, well-lit work area and avoid explosive atmospheres. Keep bystanders away.
Ensure proper grounding, avoid modifying plugs, and do not use damaged cords.
Dress properly, contain long hair, and keep away from moving parts. Wear protective gloves.
Use the correct generator, avoid forcing it, and perform regular checks for damage.
Protect from moving parts, keep guards in place, and avoid loose items.
Avoid contact with fuel, oil, and exhaust fumes. Seek medical attention if swallowed.
Prolonged exposure to noise above 85 dBA is hazardous. Wear ANSI approved ear protection.
Install outdoors with clear airflow, on a level surface, away from water and obstructions.
Mount on a concrete slab with anchor bolts, ensuring it supports the weight and extends beyond the frame.
Connect a #6 AWG grounding wire to a grounding rod driven into the earth as per codes.
Install a 12-volt battery, connecting positive and negative terminals correctly.
Check oil level, ensure ON/OFF switch is off, and fill fuel tank with unleaded gasoline.
Turn fuel valve ON, set choke to START, turn ON/OFF switch ON, and turn ignition key.
Connect tools to 120V or 240V outlets, ensuring generator capacity is not exceeded.
