To Next PageTo Next Page
Need help?Do you have a question about the Chicago Electric 91813 and is the answer not in the manual?
Includes wearing safety goggles, keeping children away, and careful handling to prevent injury.
Avoid wet conditions, direct heat, and use only a 10 Amp fuse for safety.
Inspect for damage, do not disassemble, and avoid overloading the device.
Ensure proper ventilation, use only with engine on, and avoid alcohol/drugs.
Avoid running engines indoors and stay alert to prevent hazards.
Ensure car is running, stopped, and circuit is fused for 10 Amps or greater.
Plug into cigarette lighter socket, adjusting switch for proper fit.
Check green LED indicator and connect the device with the inverter switched off.
Remove the inverter from the socket after use and store in a dry area.
Unscrew the end nut, replace the old 10 Amp fuse with an identical one, and tighten.
Includes wearing safety goggles, keeping children away, and careful handling to prevent injury.
Avoid wet conditions, direct heat, and use only a 10 Amp fuse for safety.
Inspect for damage, do not disassemble, and avoid overloading the device.
Ensure proper ventilation, use only with engine on, and avoid alcohol/drugs.
Avoid running engines indoors and stay alert to prevent hazards.
Ensure car is running, stopped, and circuit is fused for 10 Amps or greater.
Plug into cigarette lighter socket, adjusting switch for proper fit.
Check green LED indicator and connect the device with the inverter switched off.
Remove the inverter from the socket after use and store in a dry area.
Unscrew the end nut, replace the old 10 Amp fuse with an identical one, and tighten.
General| Brand | Chicago Electric |
|---|---|
| Model | 91813 |
| Category | Inverter |
| Language | English |
