To Next PageTo Next Page
Need help?Do you have a question about the Chicago Pneumatic CP714 and is the answer not in the manual?
Detailed technical specifications including bore/stroke, power, blows per minute, weight, air consumption, inlet, hose diameter, sound pressure, sound power, and vibrations.
Declaration of noise and vibration levels based on ISO standards, with guidance on actual exposure and risk assessment.
Product is designed for removing material with a chisel or needles; intended for professional use only.
Instructions for fixing accessories, connecting the device, starting, stopping, and adjusting output power.
Recommendations for using an air line lubricator with SAE #10 oil or adding air motor oil daily.
Guidelines for safe handling, repair by qualified personnel, disconnection from energy source, and periodic inspection.
Requirements for disposing of equipment according to respective country legislation and taking faulty devices out of operation.
Declaration of product conformity with EU Machinery Directives and applicable harmonised standards.
Detailed technical specifications including bore/stroke, power, blows per minute, weight, air consumption, inlet, hose diameter, sound pressure, sound power, and vibrations.
Declaration of noise and vibration levels based on ISO standards, with guidance on actual exposure and risk assessment.
Product is designed for removing material with a chisel or needles; intended for professional use only.
Instructions for fixing accessories, connecting the device, starting, stopping, and adjusting output power.
Recommendations for using an air line lubricator with SAE #10 oil or adding air motor oil daily.
Guidelines for safe handling, repair by qualified personnel, disconnection from energy source, and periodic inspection.
Requirements for disposing of equipment according to respective country legislation and taking faulty devices out of operation.
Declaration of product conformity with EU Machinery Directives and applicable harmonised standards.
This document describes the Chicago Pneumatic CP714 Air Hammer, an operator's manual providing essential information for its safe and effective use.
The CP714 Air Hammer is designed for material removal using a chisel or suitable needles. It is intended for professional use only, and no other uses are permitted. The tool operates by generating rapid blows, which, when combined with appropriate accessories, allow for tasks such as breaking, chipping, or cutting various materials. The operator controls the machine's speed by adjusting pressure on the trigger, ensuring precise control over the work. The tool is designed to perform the work itself, meaning the operator should not apply excessive pressure but rather maintain sufficient contact with the work surface to prevent bouncing.
The CP714 Air Hammer has the following key technical specifications:
The vibration level (a) and K uncertainty, as well as the sound pressure (LPA) and sound power (LWA) values, are declared according to ISO 15744 and ISO 28927-10 standards. These values are obtained through laboratory testing and are suitable for comparing with other tools tested under the same standards. However, actual exposure values in individual workplaces may be higher and depend on factors such as user work habits, workpiece, workstation design, exposure time, and the user's physical condition. The manufacturer advises against using these declared values for individual risk assessments in a workplace situation and recommends a health surveillance program to detect early symptoms related to noise or vibration exposure.
The CP714 Air Hammer is designed for straightforward operation, emphasizing user safety and efficiency.
Proper maintenance is crucial for the longevity and safe operation of the CP714 Air Hammer.
The manual also includes a Declaration of Conformity, stating that the CP714 Air Hammer, manufactured in Japan with serial numbers 00001-99999, conforms to the requirements of the Council Directives on Machinery (2006/42/EC) and applicable harmonized standard EN ISO 11148-4:2012. The technical file is available from the EU headquarters. All rights are reserved, and unauthorized use or copying of the contents is prohibited. Only authorized parts should be used, as damage or malfunction caused by unauthorized parts is not covered by warranty or product liability.
General| Brand | Chicago Pneumatic |
|---|---|
| Model | CP714 |
| Category | Tools |
| Language | English |
