Chicago Pneumatic CP9882 User Manual

Operator’s Manual
CP9882
Air Riveter
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and understand
these instructions before performing any such task. Safety instructions:
6159948730
WARNING
Operator’s Manual
CP9882
Air Riveter
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and understand
these instructions before performing any such task.
WARNING

Chicago Pneumatic CP9882 Specifications

General

Part Number	CP9882
Model	CP9882
Collet Size	1/4 inch
Sound Level	85 dB(A)
Min. Hose Size	3/8 inch
Sound Pressure	74 dB(A)
Vibration	2.5 m/s²
Drive Size	1/4 inch
Air Inlet Size	1/4 inch
Air Inlet Thread Size	1/4" NPT

Summary

General Safety Warning

Mandatory Instruction Read

Users must read and understand instructions before operating, installing, repairing, or maintaining the tool.

Machine Operation and Maintenance

Machine Type and Use

Tool designed for inserting rivets into all materials, for professional use only with recommended accessories.

Air Supply Requirements

Supply tool with 90 psig clean, dry air. Connect tool to air line using specified pipe, hose, and fitting sizes.

Lubrication Guidelines

Use air line lubricator with SAE #10 oil or add air motor oil to inlet daily. Oil chuck jaws every 5,000 cycles.

Operating Instructions

Mount correct rivet seat, insert rivet, and press trigger to pull rivet. Always wear eye protection.

Maintenance Procedures

Keep tool clean. Clean chuck jaws and casing head. Use specified jaw spanners for chuck jaw replacement.

Lock Nut and Hydraulic Oil

Do not loosen lock nut. Maintain 75mm distance. Check hydraulic oil level after 100,000 cycles.

Noise and Vibration Declaration

Declared Values

Sound pressure 62 dB(A), vibration <2.5 m/s². Values are current as of publication date.

Risk Assessment Guidance

Declared values are for comparison; actual exposure may vary. Manage tool use to prevent hand-arm vibration syndrome.

Manufacturer's Limited Warranty

Warranty Coverage

One-year warranty against defects in material and workmanship for new products purchased from CP or authorized dealers.

Warranty Exclusions

Warranty does not apply to products abused, misused, modified, or repaired by unauthorized personnel.

Claim Procedure

Return defective products to a CP Factory Service Center with proof of purchase and defect description.