To Next PageTo Next Page
Need help?Do you have a question about the Chicago Pneumatic CP7200 and is the answer not in the manual?
General| Weight | 0.8 kg |
|---|---|
| Free Speed | 12000 rpm |
| Vibration Level | 3.2 m/s² |
| Type | Random Orbital Sander |
| Pad Size | 6 in |
| Air Inlet Thread Size | 1/4 in |
| Min. Hose Size | 8 mm |
| Air Inlet Size | 1/4 in |
| Hose Size | 8 mm |
Defines the tool as a power tool for sanding with a flexible disc.
Covers connecting the device, fixing accessories, and operating the trigger.
Specifies using an air line lubricator or adding oil daily.
Advises on inspection, parts replacement, and service kits.
States disposal must follow legislation and devices must be taken out of operation.
Declares conformity with EU directives and standards.
Covers hazards related to air pressure, hoses, and connections.
Warns about loose clothing, jewelry, and hair near moving parts.
Addresses risks from flying debris and the need for eye protection.
Discusses proper accessory selection, mounting, and inspection.
Covers safe handling, posture, and contact risks with the tool.
Warns about discomfort from repetitive tasks and symptoms to watch for.
Discusses hearing loss and nerve damage from noise and vibration.
Discusses risks of explosive atmospheres from dust and fumes.
Lists recommended oils and pads for the sander/polisher.
Identifies essential tools for maintenance procedures.
