To Next PageTo Next Page
Need help?Do you have a question about the Chicago Pneumatic CP9779 Series and is the answer not in the manual?
Defines the product's intended use for material removal with abrasives. For professional use only.
Instructions for starting, operating, and stopping the tool. Includes accessory attachment guidance.
Details on using air line lubricators or manual oiling for optimal tool performance and longevity.
Covers environmental regulations for disposal and essential maintenance by qualified personnel.
Guidelines for the proper disposal of equipment according to respective country legislation.
Formal statement of product conformity with EU directives and harmonized standards.
Defines the product's intended use for material removal with abrasives. For professional use only.
Instructions for starting, operating, and stopping the tool. Includes accessory attachment guidance.
Details on using air line lubricators or manual oiling for optimal tool performance and longevity.
Covers environmental regulations for disposal and essential maintenance by qualified personnel.
Guidelines for the proper disposal of equipment according to respective country legislation.
Formal statement of product conformity with EU directives and harmonized standards.
The Chicago Pneumatic CP9779 Series Belt Sander is a professional-grade pneumatic tool designed for efficient material removal using abrasive belts. Its primary function is to sand, deburr, and finish various surfaces, making it suitable for a wide range of applications in workshops, manufacturing, and maintenance environments. The tool's design emphasizes user control and ergonomic comfort, allowing for precise operation and reduced operator fatigue during extended use.
The CP9779 Series Belt Sander operates by utilizing compressed air to power an internal motor, which in turn drives an abrasive belt at high speed. This continuous motion of the abrasive belt against a workpiece allows for effective material removal, surface preparation, and finishing tasks. The tool is particularly adept at reaching confined spaces and working on intricate contours where larger sanding equipment might be impractical. Its compact design and maneuverability enable operators to achieve fine detail work and smooth transitions on various materials, including metals, wood, and composites. The belt sander is engineered for consistent performance, providing a reliable solution for tasks requiring precision and efficiency in abrasive applications. It is specifically designed for removing material using abrasives and is not intended for any other use.
Operating the CP9779 Series Belt Sander is straightforward, with features designed to enhance user experience and safety. To begin operation, accessories must be properly fixed to the tool. The device connects to an air supply system, as illustrated in the provided diagram, ensuring a steady flow of compressed air for optimal performance. Once connected, the machine is started by pulling the trigger. The speed of the belt sander can be modulated by varying the pressure applied to the trigger, allowing operators to adjust the sanding intensity according to the specific task and material. Releasing the trigger will stop the machine. A crucial safety note advises against installing a quick coupler directly into the sander's throttle handle, emphasizing the importance of proper connection procedures to prevent accidental operation or damage. The ergonomic design of the tool, including its grip and balance, aims to minimize strain on the user, promoting comfortable and controlled operation even during prolonged use. The intuitive trigger mechanism provides immediate control over the tool's power, enabling quick starts and stops as needed for precision work.
Maintaining the CP9779 Series Belt Sander is essential for ensuring its longevity, consistent performance, and safe operation. Regular lubrication is a key aspect of its maintenance. The tool requires an air line lubricator set to deliver two drops of SAE #10 oil per minute. If an air line lubricator is not available or cannot be used, air motor oil should be added to the inlet once a day. Recommended lubricants include CP Oil PROTECTO-LUBE, available in various sizes (4 oz, 20.8 oz, and 1 gallon). Following local country environmental regulations for the safe handling and disposal of all components is also crucial, reflecting a commitment to environmental responsibility.
All maintenance and repair work must be performed by qualified personnel using only original spare parts to ensure the tool's integrity and performance. Users are encouraged to contact the manufacturer or their nearest authorized dealer for technical service or spare parts. Before performing any maintenance, it is imperative to ensure that the machine is disconnected from its energy source to prevent accidental operation. A thorough inspection of the tool is recommended every three months if it is used daily. This inspection should identify any damaged or worn parts, which should be replaced promptly. High-wear parts are specifically underlined in the parts list, guiding users to components that require more frequent attention. This proactive approach to maintenance helps in preventing breakdowns, extending the tool's lifespan, and maintaining its operational efficiency. In the event of damage or severe wear, the device must be taken out of operation and repaired only by technical maintenance staff, ensuring that only properly functioning and safe equipment is in use.
General| Weight | 0.84 kg |
|---|---|
| Air Consumption | 4.5 l/s |
| Free Speed | 12000 rpm |
| Pad Size | 75 mm |
| Length | 165 mm |
| Air Inlet | 1/4" NPT |
| Sound Level | 85 dB |
