Chicago Pneumatic CP7782 Series - User Manual

Operator’s Manual
CP7782 Series
Air Impact Wrench
To reduce risk of injury, everyone using, installing, repairing,
maintaining, changing accessories on, or working near this tool
must read and understand these instructions before performing any
such task. Safety instructions: 6159948710
WARNING

Summary

Local Sales Service and Warranty Locations

Instruction Manual

Machine Type

Product intended use for threaded fasteners in wood, metal, plastic. Professional use only.

Air Supply Requirements

Tool requires 90 psig clean, dry air. Proper hose/fitting sizes are crucial for longevity.

Lubrication

Use air line lubricator with SAE #10 oil or add air motor oil daily. Use specific grease for clutch.

Operation

Use with impact sockets. Control rotation direction and power output using switches and regulator.

Maintenance

Disassemble and inspect motor/clutch quarterly if used daily. Replace worn parts. Use recommended service kits.

Technical Data

Specifies free speed of 5200 RPM for the tool.

Noise & Vibration Declaration

Chicago Pneumatic CP7782 Series Specifications

General

Brand	Chicago Pneumatic
Model	CP7782 Series
Category	Impact Driver
Language	English