Chicago Pneumatic CP7731C User Manual

Operator’s Manual
CP7731C & CP7732C
Impact Wrench
WARNING
8940173692 Rev 02 - 07/2016
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 6159948710, before performing any such task.

Chicago Pneumatic CP7731C Specifications

General

Type	Pneumatic Impact Wrench
Drive Size	1/2"
Air Inlet Thread Size	1/4" NPT
Vibration Uncertainty (K)	1.5 m/s²
Average Air Consumption	0.25 m³/min
Min. Hose Size	3/8" / 10 mm

Summary

Operator's Manual and Safety Information

General Safety Warning

Crucial safety warning for all tool users, covering installation, maintenance, and operation.

Machine Type and Operation

Machine Type and Purpose

Defines the intended use of the impact wrench for installing/removing fasteners in various materials.

Operation Instructions

Guidance on starting, stopping, changing rotation, and adjusting output power of the tool.

Lubrication and Maintenance

Lubrication Guide

Details on required air line lubrication and specific oil/grease recommendations for motor and clutch.

Maintenance and Tune-Up

Information on routine maintenance, part replacement, and recommended service kits.

Disposal and Compliance

Disposal Guidelines

Instructions for the safe and compliant disposal of the equipment according to local regulations.

EU Declaration of Conformity

Official declaration confirming the product's compliance with relevant EU Machinery Directives.