Chicago Pneumatic CP875 User Manual

Operator’s Manual
CP875 / CP876
Die Grinder
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 6159948750, before performing any such task.
8940171826 Rev 01

Chicago Pneumatic CP875 Specifications

General

Power	0.3 hp
Free Speed	45000 rpm
Weight	0.5 kg
Air Consumption	113 l/min
Collet Size	1/4 in
Minimum Hose Size	3/8 in
Spindle Size	1/4 inch
Air Inlet Thread Size	1/4 in NPT
Air Inlet Size	1/4 in
Average Air Consumption	113 l/min
Actual Air Consumption	113 l/min

Summary

Air Diagram

Air Supply Diagram

Illustrates the pneumatic system connections for the die grinder, including hose sizes and fittings.

Technical Data and Machine Operation

Technical Data

Provides detailed specifications for CP875 and CP876 models including speed, power, capacity, air consumption, and noise levels.

Machine Type

Describes the pneumatic tool as a 1/4" collet chuck grinder for grinding use only, intended for professional use.

Implementation and Operation

Details how to connect the device, attach accessories, and operate the trigger for starting, stopping, and speed control.

Lubrication

Specifies the use of SAE #10 oil in an air line lubricator or air motor oil for the motor and Mobilux EP-2 for the bevel gear.

Maintenance

Outlines inspection every three months, replacement of worn parts, and ensuring disconnection from the energy source.

Disposal

Instructs to follow local legislation for equipment disposal and to take damaged or malfunctioning devices out of operation.

Declaration of Conformity

States compliance with Council Directives for 'Machinery' and applicable harmonised standards, issued by Chicago Pneumatic Tool Co.