Chicago Pneumatic CP7540 Series User Manual

Operator’s Manual
CP7540, CP7545 & CP7550 Series
4“, 41/2“ & 5“ Angle Grinders
WARNING
To reduce risk of injury, everyone using, installing, repairing, maintaining,
changing accessories on, or working near this tool must read and
understand these instructions, as well as separately provided safety
instructions part number 6159948760, before performing any such task.

Chicago Pneumatic CP7540 Series Specifications

General

Type	Angle Grinder
Air Inlet Thread Size	0.25 in
Power	0.7 hp (520 W)
Minimum Hose Size	0.375 in (10 mm)
Spindle Thread	5/8-11 in

Summary

Operator's Manual Introduction

General Safety Warning

Mandatory safety notice for all users regarding tool operation, installation, and maintenance.

Technical Specifications and Diagrams

Air Supply Diagram

Illustrates the recommended air supply connection for the angle grinders.

Tool Performance Data

Details key dimensions and performance metrics like speed, power, air consumption, and sound levels.

Machine Operation and Maintenance

Machine Type and Purpose

Defines the tool's intended use for abrasive material removal and emphasizes reading instructions.

Operating Instructions

Covers accessory installation, air connection, and trigger-based operation for starting and stopping.

Lubrication Requirements

Specifies the type of oil for the motor and grease for the bevel gear.

Maintenance and Disposal

Outlines maintenance procedures, parts replacement, and safe disposal of equipment according to regulations.

Declaration of Conformity

Product Compliance Information

States conformity with EU directives, applicable standards, and issuer details.

Parts Identification and Accessories

Component Breakdown

Detailed diagram and parts list with part numbers, descriptions, and quantities for grinder components.

Recommended Accessories

Lists optional items such as vibration damping handles and lubrication oils for enhanced use.