Chicco Dream Cradle - Warranty; Troubleshooting

10
connection is established with the rst device on which the
application is opened.
LED OPERATION
STATUS LED COLOUR
Device ON: Red
Programme running: Green
No power-o: O
TROUBLESHOOTING
PROBLEM SOLUTION
The Dream Cradle application does not
connect
1. Check that there are no other smartphones already connected to The
Dream Cradle.
2. Check that The Dream Cradle is correctly connected to the electric net-
work and that The Dream Cradle button is lit.
3. The Bluetooth® button of the application must be ashing; if it is red, you
must press it, so it becomes ashing yellow.
4. Perform the pairing procedure again between the smartphone The
Dream Cradle.
5. Switch The Dream Cradle o and on, using the specic button on the
back
6. Close the application on your smartphone and open it again.
There is a red circle on the Bluetooth®
button
1. Press the button so it becomes ashing yellow. If The Dream Cradle
is on and the pairing procedure was correctly performed, the button
will become solid green, indicating that the connection has been es-
tablished.
2. If the connection is not established, perform the pairing procedure
again
3. Switch The Dream Cradle o and on, using the specic button on the
back
4. Close the application on your smartphone and open it again.
STATUS LED COLOUR
Request for association: Flashing blue
Association completed: Blue
No power-o: O
WARRANTY
The product is guaranteed against any conformity defect
in normal conditions of use as stated in the instructions.
Therefore, the warranty does not apply in the case of dam-
age caused by improper use, wear or accidental events. For
the duration of the warranty on conformity defects please
refer to the specic provisions of applicable national laws in
the country of purchase, where appropriate.