Chicco Unico-Evo i-Size - Installation and Configuration; Installation Methods by Height Range

51
K. Belt adjustment button
L. Recline lever
M. 360° rotation lever
N. Isox connectors
O. Isox connector indicators
P. Isox connector extraction and release buttons
Q. Top Tether
R. Top Tether Guide
CORRECT POSITION IN THE VEHICLE
40-105 cm:
This is an advanced “i-Size” Child Restraint System. It is approved un-
der Regulation No. 129/03 for use in vehicles on “i-Size compatible”
seats as indicated by the vehicle manufacturer in the vehicle users’
manual. If in doubt, consult either the child restraint manufacturer or
the vehicle manufacturer.
100-150 cm:
This is an advanced child restraint system classied as an “i-Size”
booster. It is approved under Regulation No. 129/03 for use in vehi-
cles on “i-Size compatible” seats as indicated by the vehicle manufac-
turer in the vehicle users’ manual. If in doubt, consult either the child
restraint manufacturer or the vehicle manufacturer.
If the vehicle does not have an i-Size seat check the vehicle compat-
ibility list, available via the QR code on the product installation label
and at the end of this manual.
In this conguration, when using in upright position with the Isox
connectors, this Child Restraint System may not t in all approved
vehicles.
In this case the Enhanced Child Restraint System can be tted using
only the vehicle belt.
INSTALLATION
40-87 cm (rear-fac-
ing)
Built-in safety har-
ness system + ISO-
FIX connectors +
Top Tether
76-105 cm (for-
ward-facing)
Built-in seat belt
system + ISOFIX
connectors + Top
Tether
100-150 cm
ISOFIX connectors
+ vehicle's 3-point
seat belt or just the
vehicle's 3-point
seat belt
1. 40-87cm i-SIZE Universal ISOFIX rear-facing: installation
with ISOFIX connectors and Top Tether and built-in seat belt
system (see illustrations from number 4 to 17).
The reducer cushion must be used from 40 cm to 60 cm.
REDUCER CUSHION
From 40 cm to 60 cm