Chieftec Compact Series - User Manual

Arena Electronic GmbH
Halskestraße 22 -26
DE-40880 Ratingen
Tel. +49 2102 56 0 77 - 0
Fax. +49 2102 56 0 77 – 99
Email: info@chieftec.eu
www.chieftec.eu
In this case you can trust!
The listed specifications may be altered at any point in time without any pre-notice. Chieftec® is a registered trade mark. All other brands and/or logos are property of the respective owners.
COMPACT SERIES
INSTALLATION GUIDE
1. Open the chassis and install the I/O shield and DC-DC power cable
(color: black/yellow) which you need to take it out of the PSU package.
Installation

Summary

Installation

Install I;O Shield and DC-DC Power Cable

Open chassis, install I/O shield and DC-DC power cable from PSU package.

Install the Mainboard

Mount the mainboard into the chassis.

Install Distance Holders for DC-DC Board

Screw distance holders into the chassis for the DC-DC board.

Connect 4-PIN DC-DC Power Cable to DC-DC Board

Connect the 4-PIN DC-DC power cable (black/yellow) to the DC-DC board.

Connect DC-DC Grounding Cable to Mainboard Screw

Connect the DC-DC grounding cable to the mainboard screw.

Connect 24-PIN Power Cable

Connect the 24-PIN power cable to the mainboard and DC-DC board.

Mount 2.5-inch HDD

Fix the 2.5-inch HDD with four screws onto its mounting bracket.

Connect HDD Cables and Mount Holder

Connect SATA HDD power and data cables, then mount the HDD holder.

Close and Secure Chassis

Close and screw the chassis to complete the assembly.

Chieftec Compact Series Specifications

General

Motherboard Support	Micro-ATX, Mini-ITX
Drive Bays (External)	1 x 3.5"
Drive Bays (Internal)	2 x 2.5"
Front Panel Ports	2 x USB 2.0
Cooling	1 x 120mm
Power Supply	Not included
Dimensions (H x W x D)	380 x 175 x 380 mm
Material	Steel, Plastic