To Next PageTo Next PageWhat to do if the Chino IR-BAT measured value is incorrect?
If your Chino Thermometer displays an incorrect measured value, consider the following: 1. Ensure lead wires are tightly connected. 2. Move the thermometer away from noise sources. 3. Verify and correct the emissivity setting. 4. Shield the measured object from any external heat sources. 5. Clean the lens to remove any dirt. 6. Adjust the target.
Why doesn't the power supply lamp light on my Chino IR-BAT?
The power supply lamp might not be lighting on your Chino Thermometer due to: 1. Power not being supplied. Check the connection of the lead wires. 2. Low power voltage. Check the power voltage.
General| Type | Infrared Thermometer |
|---|---|
| Response Time | 500ms |
| Distance to Spot Ratio | 12:1 |
| Power Supply | 9V battery |
| Resolution | 0.1°C / 0.1°F |
| Emissivity | Adjustable 0.10~1.0 |
| Operating Temperature | 0 to 50°C (32 to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Battery Life | Approx. 12 hours continuous use |
| Spectral Response | 8 to 14 µm |
Details the physical layout and components of the general type thermometer.
Illustrates the physical characteristics and dimensions of the extension cable.
Details precautions to avoid when installing the thermometer in various environments.
Explains how to position the thermometer for optimal measurement based on object size.
Guides on aligning the thermometer with the measurement object using sight lines.
Provides details on wiring, power supply, and output connections for the thermometer.
Explains how to adjust emissivity using digital switches for accurate temperature readings.
Outlines regular checks and cleaning procedures for the thermometer's lens and connections.
Lists common problems, their causes, and suggested solutions for the thermometer.
Provides critical advice on setting, connection, power supply, and warm-up for optimal use.
Details the specifications and dimensions of L-shaped metal mounting brackets.
Shows the design and dimensions of the standard protective case accessory.
Illustrates the water-cooled protective case with its connection points.
Presents the dimensions and features of the sanitary case accessory.
Lists general technical details applicable to all models of the thermometer.
Details measuring ranges, resolution, stability, and repeatability for each model.
Specifies requirements for CE marking compliance, including cable and power source usage.
