CHINT NZ7 Series - Wiring Diagram of External Terminals; Controller Installation

:
4
21
3
DC24V/0.5A
1
3 5
2
Installation
Installation
Indication of U
N
status Indication of U
R
status
Zero line
Power signal
On signal
Tripping signal
Zero line
Power signal
On signal
Tripping signal
Output is AC230V/0.5A
Auxiliary power Stop signal
Passive contact point Feedback signal Passive contact point
Start control of generator
Note: the hidden line is the internal wiring of the controller.
Controller installed in the cabinet split on the panel
Wiring diagram of external terminals of the controller
4
CLACK!