Chipolino TECHNO - Product Features and Parts

The pulling ring
Headrest
Baby cushion
Shoulder pads
5 points harness
system & buckle
Crotch pad
Pull rod for
reclining
switch-lock
handle
Center adjuster
belt
ISOFIX
release button
Belt guider in
Group II/III
ISOFIX
Hook
Top tether
Top tether
adjuster
The belt guider in
Group II/III
5
PRODUCT FEATURES
MAIN PARTS DIAGRAM
INSTRUCTIONS FOR USE
IMPORTANT!
 Child restraint restraint while traveling in a vehicle designed for children weighing from
0 to 36 kg, classied in weight groups:
• 0+ (0-13 kg): universal and semi-universal integral ISOFIX child restraint, ISOFIX class D.
The restraint system is installed in direction opposite to the direction of the vehicle and the child is
"rearward facing";
• I (9-18kg): universal and semi-universal integral ISOFIX child restraint, ISOFIX class D . The re
straint system is installed in direction opposite to the direction of the vehicle and the child is
"rearward facing" or in the direction of the vehicle and the child is “facing forward”;
• II (15-25kg): universal and semi-universal non-integral system for securing children. The restraint
system is installed in the direction of the vehicle and the child is “facing forward”;
• III (22-36kg): universal and semi-universal non-integral system for securing children. The restraint
system is installed in the direction of the vehicle and the child is “facing forward”;
 ISOFIX attachments to vehicle (for groups 0+ and I);
 Possibility for additional xing of the car seat groups II and III with ISOFIX connectors;
 Top tether (only for groups 0+ and I, “REARWARD FACING“ car seat);
 The restraint rotates 3600 on the base;
 Backrest recline;
 Head rest height adjustment;
 5-point safety harness on the restraint;
 Additional soft pads;
• Follow exactly the instructions and sequence of installation steps and use of the product described
in the text and gures of this manual.
• Check the security of xing after each operation!
• ALWAYS CHECK THE SECURITY OF FIXING OF THE SAFETY BELTS!
• After each installation make sure that the seat belts are not twisted and are in the correct position