6
INSTALLATION OF CAR SEAT GROUP 0+ AND GROUP I
For groups 0+ and I you can install the car seat on vehicle seat with 3-point safety belt of the vehicle or
with ISOFIX connectors:
“REARWARD FACING” group 0+ and I
“FORWARD FACING” group I
At ISOFIX attachment, there are three anchor points - two ISOFIX connectors and top tether.
For groups II and III the car seat is installed with ISOFIX + 3-point safety belt of the vehicle or only with
3 – point safety belt of the vehicle. DO NOT USE THE TOP TETHER!
ISOFIX+top tether
3- point safety belt of the vehicle
3- point safety belt of the vehicle
3- point safety belt of the vehicle
To Next Page
Loading...
