Chipolino TECHNO - ISOFIX Installation Methods

7
INSTALLATION OF THE CAR SEAT WITH ISOFIX CONNECTORS
INSTALLATION OF THE CAR SEAT WITH ISOFIX AND TOP TETHER
ISOFIX attachment points
in the vehicle
ISO FIX
Install the ISOFIX connectors
“REARWARD FACING”
car seat
upper anchor point
tighten
shake the car seat
push
push
click
push
shake
IMPORTANT! When the ISOFIX connectors are xed the indicators must show „green color” (4)! That
is conrmation for correct xing of the car seat.
CAUTION! After installation make sure that the car seat is rmly and securely secured to the vehicle
seat (5 and 6). If the seat shakes or the ISOFIX connectors are removed, repeat steps 1 to 4 to reinstall
the seat.
Note: The upper anchor point is xed device on the trunk or the oor of the vehicle.
IMPORTANT! Tighten the belt of the top tether, until the indicator of top tether adjuster show „green
color” (3) If the indicator does not show green, reinstall.
CAUTION! After installation make sure the car seat is rmly and securely secured (4).