SAFETY HARNESS SYSTEM
1. Join the harness buckle’s two sides parts
together, slide them into the central part, the
buckle is secured after you hear a positive
click. See Fig. 9 - a) & b).
NOTE: When a child is sitting in the
restraint, you must check whether the buckle is
still secured.
2. To release the buckle, press the red
button located on the buckle, pull out the two
sides buckle tongue.
In order to protect you child better, after
placing him/her in the child restraint and
locking the harness buckle, you should tighten
the harnesses so that they are snug and flat
against the child’s body. They should never be
twisted or loose.
To tighten the harnesses, pull the shoulder
straps upwards to remove the slack from the
lap sections of the harness (Fig. 10), at the
same time pull the adjuster strap coming from
the lock by your other hand.
The lengthen the harness, press the button
on lock between child’s legs (see Fig. 10-а,b),
then pull the two harnesses simultaneously in
your direction by your other hand (see Fig.
10-с). Please note that while you’re doing this,
you must hold the harnesses, not the
harnesses’ covers.
7
LOCKING AND UNLOCKING THE HARNESSES
ADJUSTING THE LENGTH OF HARNESS
fig. 9
fig. 10
To Next Page
Loading...
