EasyManua.ls Logo

Chiroform DF-1688F - Chair Operation Basics

Chiroform DF-1688F
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
How to Use the Reclining System
To recline the Backrest : Press the reclining up button until the Backrest is at your
desired angle.
To incline the Backrest Press the reclining down button until the Backrest is at your
desired angle.
To lift the Footrest : Press the Footrest Up button until the Footrest is upward to your
desired height.
To lower the Footrest : Press the Footrest Down button until the Footrest is downward
to your desired height.
To reset the Backrest and Footrest : Press the Reset button, the Backrest and Footrest is
to the initial position.
How to Adjust the Length of the Footrest
The length of the Footrest can be adjusted to the comfort of the user. Lift the Footrest
Adjustment Lever, push or pull the Footrest to get the desired position (lengthen/shorten about 8cm)
and loosen the lever to lock the position.
Footrest Adj ustment Lev er (Lengthen) (Shorten)
Moving the Massage Chair
Adjust the Backrest to its fully upright position.
Convey: There should be two more persons at the each side of the Chair, one catching hold of the
groove on the one side of Armrest and the other catching hold of the other side to take the Chair