together.
● Move: Hold down on the top of Backrest and causes the Moving Castors to be well-grounded
then push it to move.
(Convey) ( M ove)
Ca stors
Power On
1. Connect the AC Plug to the Electrical Outlet.
2. Turn on the Main Power Switch located at the back of Backrest.
AC Plug
M ain Power Switch
After Use
● Return the reclining Backrest to the upright position and lower the Footrest completely after use.
● With the Timing Function, the Chair will automatically stop after 30 minutes of operation and
switch off the Main Power Switch after it.
● To avoid malfunction of the Chair and accidents with children, do remember to switch off the
Main Power Switch and disconnect the AC Plug from the Electrical Outlet after use.
Massage Programs
Timing Function
●Press the button, and you can set the time.
●The default massage time is 30 minutes. If you don't choose timing, massage procedure will be
closed automatically after 30 minutes.
●You can also select massage time through timing buttons according to
your desire. After setting of the time, the machine will begin to count down till the remaining time
is zero, and then the procedure will be closed automatically.
&In the changing of automatic procedure and individualized procedure, the remaining time won't
be changed, namely, the change of massage procedure won't affect the original time. If it's
necessary to reselect the time, please press one of the 3 timing buttons for setting.
To Next Page
Loading...