Back of Remote Controller Support
Fix ing Screw
Removal
Installation
Cap
Screws
Screwdriver
Loosen
Tighten
(2 piec es)
Seat Cushion Installment
● When installing the Seat Cushion, insert one air hose in it to another one of the seat support end
to end, align with the tie-in port of air hoses to avoid air leaking.
●When separating the air hoses, pull them out only.
● The Seat Cushion is attached to the seat support with two velcro tapes.
Separate air hoses
Pull out
Headrest
● Headrest is stuck to the Backrest Pad with velcro tapes.
a. In bonding, stick them together.
b. To separate, take it away directly(A).
Backrest Pad
●Backrest Pad is attached to the Backrest by zipper, to load or unload Backrest Pad, only need to
zip the zipper(B).
●Installing Heating Massage:
a. Insert one plug with another plug end to end only.
b. To separate, pull them out .
●Turn the Backrest Pad to behind the back of the Chair if you prefer a more intense massage(C).
A C B
Velcro tapes
Zipper
Inse rt the plugs for
Back Heating M assage
To Next Page
Loading...