Backrest Folding Lev er
Placing of the Chair
●Secure sufficient space around the Chair for reclining purpose.
●Make sure that there is an allowance of more than 60cmboth in the front of and behind the Chair.
60cm
at least
60cm
at least
● Put a carpet under the Chair to prevent
scratching of the flooring.
● Make sure that there is no obstruction
behind the Chair for a safe recline during
operation.
Installation of the Remote Controller Support
●Install the Remote Controller Support at the left side of Chair and fix securely at two places with
screws. Finally finish up the work by installing the Cap.
●Adjustment of Remote Controller Support: In normal times, adjust it freely and if it is loose,
tighten it by the Fixing Screw securely.
●Installation/Removal of Remote Controller: 1. Installation: insert it from the top.
2. Removal: hold the top and pull it upward.
To Next Page
Loading...