EM10 Multi compartment oven
25
User’s manual
12/2016
EN
Electrical connection
The EM10 is an electric instrument, which requires an earth
connection. Above all verify the condition of this connection.
In addtion, the electrical network must incorporate, upline from
the unit, a differential circuit breaker with a sensitivity 30 mA -
class AC.
The connection to the mains is realized by the means of the
power cord delivered with the
EM10.
The mains plug is on the rear side of the instrument.
Power ON / OFF
The EM10 is not fitted with a ON / OFF switch.
The EM10 powering ON / OFF is performed by
connecting / disconnecting the apparatus.
To Next Page
Loading...