Chord Electronics
2yu | User manual
10
8 Selecting an output
With 2go and 2yu switched on, select an output using the OUTPUT button: press repeatedly to scroll
between USB or optical/RCA/BNC (which are simultaneously active).
Before proceeding, please choose which output you will be using with your connected DAC. If using the
USB output, ensure you have connected your DAC and powered it on before proceeding with the set-up.
The 2yu will need to see a USB signal from your DAC in order to activate its services for set-up and
playback.
Button colour
2yu status
USB Type-A
Optical/RCA/BNC coaxial
9 Mute
2yu benefits from a mute feature which mutes the output without pausing the signal. Simply press
MUTE for on/o operation. Mute is only available in optical/RCA/BNC coaxial mode, USB is a native
pass-though.
Button colour
2yu status
Muted
Unmuted
To Next Page
Loading...