Why does my Christie Monitor remote control not work?
If the remote control for your Christie Monitor isn't working, start by replacing the batteries. If that doesn't solve the problem, try unlocking the buttons by pressing ENTER, ENTER, EXIT, EXIT, ENTER, and EXIT in sequence. Also, make sure the IR extender cable is correctly connected.
Why is my Christie Monitor remote control not working?
If your Christie Monitor's remote control isn't working, consider the following: * Replace the remote control batteries. * The buttons might be locked. Unlock them by pressing ENTER, ENTER, EXIT, EXIT, ENTER, and EXIT, in sequence. * If using an IR extender, make sure it's correctly connected.
What to do if my Christie FHD552-X has no picture but the menus are visible?
If your Christie Monitor displays menus but no picture, try these solutions: * Ensure the correct source is selected. * Verify that the source component is powered on. * Check the connections between the source component and the display.
Why are HDMI images not displaying on my Christie Monitor?
If images from an HDMI source are not displaying on your Christie Monitor: * The resolution and frequency of the video card in the computer may not be compatible with the display. Select a compatible resolution and vertical frequency. * The HDMI cable from source to display might be defective or too long. Try a known-good and/or shorter HDMI cable.
How to brighten a dark image on a Christie FHD552-X?
If the image on your Christie Monitor is too dark, increase the brightness and/or backlight settings.
Why is my Christie FHD552-X Monitor display jittery or unstable?
If your Christie Monitor display is jittery or unstable: * Ensure that the source is properly connected and of adequate quality for detection. * The horizontal or vertical scan frequency of the input signal may be out of range for the display. Correct at the source.
Why are computer images not displaying correctly on my Christie Monitor?
If computer images do not display correctly on your Christie Monitor, it may be due to the resolution and frequency of the video card in the computer being incompatible with the display. Try selecting a compatible resolution and vertical frequency. Additionally, you may need to adjust the Clock and Phase settings.
How to fix a jittery or unstable display on a Christie Monitor?
If the image on your Christie Monitor is jittery or unstable, first ensure that the source is properly connected and of adequate quality. If the issue persists, the horizontal or vertical scan frequency of the input signal may be out of range for the display. Correct this at the source.
What to do if my Christie Monitor has menus but no picture?
If your Christie Monitor displays menus but no picture, first ensure the correct source is selected. Then, verify that the source component is powered on and correctly connected to the display.
What to do if composite video images don't display on my Christie Monitor?
If images from a Composite video source do not display on your Christie Monitor, and both the Composite and S-Video inputs are connected to sources, disconnect the S-Video source.
To Next Page
General
