Christie MicroTiles - Page 3

Content
Product overview..................................................6
Terminology.......................................................6
Related documentation................................................7
Configuring the array...............................................8
System requirements for the WebUI........................................8
Automatically configure the array......................................... 8
Creating a subarray..................................................9
Manually adding a subarray...........................................9
Automatically adding a subarray........................................9
Editing a subarray.................................................9
Prioritizing the ECUs in the array.........................................10
Configuring the IP address of the ECU......................................10
Manually adding tiles to the canvas....................................... 11
Viewing the array as a wire map.........................................12
Creating a custom video resolution........................................12
Setting the date and time............................................. 12
Switching the display mode............................................13
Powering all tiles on or off through the WebUI.................................13
Saving tile and ECU settings............................................13
Restoring tile and ECU settings..........................................13
Restoring factory defaults............................................. 14
Adjusting the image settings........................................ 15
Changing the size and position of video content................................15
Adjusting image contrast and gamma......................................15
Configuring the color and brightness of the array...............................16
Adjusting the color correction and temperature..............................16
Adjusting the color and luminance of individual tiles...........................17
Configuring the brightness threshold of the weakest tile........................ 17
Setting the brightness of the array......................................18
Adjusting brightness levels at the edge of the tiles............................18
Modifying tile uniformity............................................18
Sharpening the image................................................19
Christie MicroTiles User Manual 3
020-102146-01 R
ev. 1 (07-2015)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.