Displaying a test pattern..............................................19
Correcting the image alignment for individual tiles..............................19
Monitoring and maintaining the array..................................21
Monitor system information and log files....................................21
Viewing the ECU system information.....................................21
Viewing the ECU log files............................................21
Viewing the tile system information.....................................22
Viewing the tile log files............................................ 22
R
eviewing the ECU video input and output quality............................23
LED status indicators................................................23
ECU LED indicators............................................... 23
Tile LED indicators................................................23
Upgrading the main software...........................................23
Checking the current software version from the WebUI.........................24
Upgrading the tile, ECU, and Light Engine software........................... 24
Upgrading the Field Programmable Gate Array (FPGA)..........................25
Correcting a failed software upgrade.....................................25
Resetting selected tiles and ECUs.......................................26
Resetting all tiles and ECUs in the array...................................26
Monitoring the MicroTiles array..........................................26
Viewing SNMP system information......................................26
Specifying what events create notifications.................................26
Recording event notifications in an SNMP trap...............................27
Identifying where notification emails are sent...............................27
Cleaning the tiles...................................................27
Cleaning the inside surface of the screen..................................27
Cleaning the outside surface of the screen.................................28
Cleaning the lens.................................................28
Removing dust from the light engine heat sinks..............................28
Cleaning the air filter..............................................28
Troubleshooting.................................................. 30
Images on the tiles are flickering.........................................30
Video signal is lost..................................................30
Video is not displaying............................................... 30
Extra pixels and ghosting in the image..................................... 31
Color matching is not working...........................................31
The same image is replicated on each tile in the array............................32
Content
Christie MicroTiles User Manual 4
020-102146-01 R
ev. 1 (07-2015)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.