Service Manual
Page 22
Spline Shafts Apply chain lube regularly.
During operation in muddy conditions,
clean and lube the front fork spline
and the rear shock spline as often as
possible.
Spiral Bevel Gears Gears are coated with TEFNI2000 to
provide lubrication and corrosion
resistance.
Apply a light amount of Pro-Gold chain
lube if noise occurs.
AWD Switch
Apply heavy grease to the ball bearing
holes in the switch regularly, especially
if the switch becomes tight.
Front “Silent” Freewheel Hub Apply a lightweight oil lube if the hub
friction increases or if it begins to
squeak.
AWD Lubrication Guide
To Next Page