6
How to operate your C1 Grand Malvern Jumping Hour
Setting the time
The crown should sit ush to the case
(position
1
) in order to maintain water
resistance.
• To re-power the watch after a period
of non-use, simply wind the crown in
a clockwise direction.
• To set the time pull out the crown
gently into position
2
. Turn the crown
in a clockwise direction until you
reach the correct time e.g. 10.08 hr.
For precise time setting it is
recommended you pass beyond the
desired minute and to set the hand
backwards.
1 2
1. Manual winding
2. Time setting
To Next Page
Loading...
