EasyManua.ls Logo

Chrysler 200 - Headlights;Parking Lights;Automatic Headlights; Instrument Panel Dimmer; Turn Signals;Lane Change Assist

Chrysler 200
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Headlights/Parking Lights/Automatic Headlights
Rotate the end of the lever to the first detent for parking lights , the second detent for
headlights
, and the third detent for AUTO.
When set to AUTO, the system automatically turns the headlights on or off based on ambient
light levels.
Instrument Panel Dimmer
Rotate the center portion of the lever to the extreme bottom position to fully dim the
instrument panel lights and prevent the interior lights from illuminating when a door is opened.
Rotate the center portion of the lever up to increase the brightness of the instrument panel
lights when the parking lights or headlights are on.
Rotate the center portion of the lever upward to the next detent position to brighten the
odometer and radio controls when the parking lights or headlights are on.
Rotate the center portion of the lever upward to the last detent to turn on the interior lighting.
Flash To Pass
Pull the lever toward you to activate the high beams. The high beams will remain on until the
lever is released.
High Beam Operation
Push the lever forward to activate the high beams.
NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent headlight
glare and as a courtesy to other motorists.
Front Fog Lights
Turn on the parking lights or low beam headlights and pull out the end of the lever.
Turn Signals/Lane Change Assist
Tap the lever up or down once and the turn signal (right or left) will flash three times and
automatically turn off.
OPERATING YOUR VEHICLE
17

Table of Contents

Other manuals for Chrysler 200

Related product manuals