Preparations for Jacking
Park the vehicle on a firm level surface, avoid ice or
slippery areas, and set the parking brake. Place the gear
selector in PARK.
•
Turn on the Hazard Warning Flasher, park vehicle on
firm, level surface.
•
Put gear shift in park (automatic transmission) or
reverse (manual transmission).
•
Set parking brake and turn off engine.
•
Passengers should not remain in the vehicle while the
vehicle is being jacked.
Changing a Tire
The spare wheel, scissors jack, and lug wrench are
stowed under the spare tire cover in the rear cargo area.
Do not attempt to raise this vehicle using a bumper jack.
188 WHAT TO DO IN EMERGENCIES
To Next Page
Loading...
