EasyManua.ls Logo

Chrysler 2012 300 - Shift Lever Override

Chrysler 2012 300
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING! (Continued)
Take care to avoid the radiator cooling fan whenever the hood is raised. It can start
anytime the ignition switch is on. You can be injured by moving fan blades.
Remove any metal jewelry, such as watch bands or bracelets, that might make an
inadvertent electrical contact. You could be severely injured.
Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas
which is flammable and explosive. Keep open flames or sparks away from the battery.
Do not allow vehicles to touch each other as this could establish a ground connection
and personal injury could result.
Failure to follow this procedure could result in personal injury or property damage due to
battery explosion.
Do not connect the cable to the negative post (-) of the discharged battery. The
resulting electrical spark could cause the battery to explode and could result in personal
injury.
SHIFT LEVER OVERRIDE
If a malfunction occurs and the shift lever
cannot be moved out of the PARK
position, you can use the following
procedure to temporarily move the shift
lever:
The shift lever override port is located
in the storage bin to the right of shift
lever.
Firmly set the parking brake.
Turn the ignition switch to the ACC or
ON position without starting the
engine.
Press and maintain firm pressure on the
brake pedal.
Using a screwdriver or similar tool, press and hold the override tab through the access
port on the center console.
Move the shift lever into the NEUTRAL position.
The vehicle may then be started in NEUTRAL.
Reinstall the override cover.
WHAT TO DO IN EMERGENCIES
73

Table of Contents

Other manuals for Chrysler 2012 300

Related product manuals