EasyManuals Logo

Chrysler 2014 200 User Manual

Chrysler 2014 200
516 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #416 background imageLoading...
Page #416 background image
4. Turn the ignition to the ACC or ON/RUN position,
but do not start the engine.
5. Press and maintain firm pressure on the brake pedal.
6. Insert a screwdriver or similar tool into the access hole
(at the front of the cupholder) and push and hold the
override release lever forward.
7. Move the shift lever to the NEUTRAL position.
8. The vehicle may then be started in NEUTRAL.
9. Reinstall the cupholder liner.
TOWING A DISABLED VEHICLE
This section describes procedures for towing a disabled vehicle using a commercial wrecker service.
Towing Condition Wheels OFF the Ground All Models
Flat Tow NONE If transmission is operable:
Transmission in NEUTRAL
25 mph (40 km/h) max speed
15 mi (24 km) max distance
Wheel Lift Or Dolly Tow Rear
Front OK
Flatbed ALL BEST METHOD
414 WHAT TO DO IN EMERGENCIES

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chrysler 2014 200 and is the answer not in the manual?

Chrysler 2014 200 Specifications

General IconGeneral
BrandChrysler
Model2014 200
CategoryAutomobile
LanguageEnglish

Related product manuals