EasyManua.ls Logo

Chrysler 2014 200 - Chassis

Chrysler 2014 200
516 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Component Fluid, Lubricant, or Genuine Part
Spark Plugs 2.4L with
PZEV*
We recommend you use MOPAR® Spark Plugs (Gap 0.031 in [0.8 mm]).
Spark Plugs 3.6L Engine We recommend you use MOPAR® Spark Plugs (Gap 0.043 in [1.1 mm]).
Fuel Selection 87 Octane
* PZEV = Partial Zero Emission Vehicle
Chassis
Component Fluid, Lubricant, or Genuine Part
Automatic
Transmission
Use only ATF+4® Automatic Transmission Fluid. Failure to use ATF+4® fluid may affect the
function or performance of your transmission. We recommend MOPAR® ATF+4® fluid.
Brake Master
Cylinder
We recommend you use MOPAR® DOT 3 and SAE J1703. If DOT 3 brake fluid is not available,
then DOT 4 is acceptable.
Power Steer-
ing Reservoir
We recommend you use MOPAR® Power Steering Fluid +4, MOPAR® ATF+4® Automatic
Transmission Fluid.
7
MAINTAINING YOUR VEHICLE 473

Table of Contents

Related product manuals