EasyManua.ls Logo

Chrysler 2016 200 - Remote Starting System - if Equipped; How to Use Remote Start

Chrysler 2016 200
696 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the equipment.
REMOTE STARTING SYSTEM IF EQUIPPED
This system uses the Key Fob with Remote
Keyless Entry (RKE) transmitter to start the
engine conveniently from outside the vehicle
while still maintaining security. The system has
a range of approximately 300 ft (91 m).
NOTE:
The vehicle must be equipped with an automatic
transmission to be equipped with Remote Start.
Low fuel indicator must not be illuminated.
Obstructions between the vehicle and the Key Fob may
reduce this range.
How To Use Remote Start
All of the following conditions must be met before the
engine will remote start:
Vehicle in PARK
Doors closed
Hood closed
Trunk closed
Hazard switch off
Brake switch inactive (brake pedal not pushed)
Battery at an acceptable charge level
RKE panic button not pushed
System not disabled from previous remote start event
Vehicle Security Alarm not active
Ignition in OFF position
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Table of Contents

Related product manuals