6. Install the bulb and connector assembly into the
headlamp housing and rotate clockwise to lock it in
place.
7. Install the headlamp bulb cap in the headlamp hous-
ing and rotate clockwise to lock it in place.
8. Lock headlamp access door in wheel liner.
Front Turn Signal Lamp
1. Open the hood.
NOTE: Removal of the air cleaner filter housing may be
necessary prior to replacing bulbs in the lamp assembly
on the passenger side of the vehicle.
2. Remove the beauty cover, by removing all push pins
and lifting beauty cover.
3. Remove the brace by removing the four fasteners and
loosening the 5th inboard fastener.
Beauty Cover
640 MAINTAINING YOUR VEHICLE
To Next Page
Loading...
Need help?
General
