4. Twist the front turn signal lamp socket assembly
counterclockwise, and then remove the front turn
signal lamp assembly from the lamp housing.
5. Pull the bulb out of the socket and insert the replace-
ment bulb.
6. Install the front turn signal lamp socket assembly into
the housing, and rotate the front turn signal lamp
socket clockwise to lock it in place.
7. Install air cleaner filter housing, if removed.
8. Install brace, brace bolts and tighten as shown.
Front Turn Signal Lamp Socket
Brace Bolt Tightening Sequence
7
MAINTAINING YOUR VEHICLE 641
To Next Page
Loading...
