C H R Y S L E R 3 00 / S P E C I F I C A T I O N S
All-new 2011 Chrysler 300
SPECIFICATIONS
Dimensions are in inches (millimeters) unless otherwise noted.
Brampton Assembly Plant, Ontario, Canada
December 2010 as 2011 model
ENGINE: 3.6-LITER PENTASTAR DOHC 24-VALVE V-6
Standard — 300 and 300 Limited (RWD)
60-degree V-type, liquid-cooled
220 cu. in. (3604 cu. cm)
3.78 x 3.27 in. (96.0 x 83.0 mm)
Chain-driven DOHC, 24 valves, hydraulic end-pivot roller
rockers
Sequential, multi-port, electronic, returnless
Aluminum deep-skirt block with aluminum-alloy heads
292 bhp (218 kW) @ 6,350 rpm (81.1 bhp/L)
260 lb.-ft. (353 N•m) @ 4,800 rpm
6,400 rpm (electronically limited)
Unleaded regular, 87 octane (R+M)/2; and E-85 (Federal Bin
5, 37 state compliant)
6 qt. (5.7L) with dry filter
Dual three-way catalytic converters, heated oxygen sensors
and internal engine features
(a)
Max. Gross Trailer Weight (unbraked trailer)
EPA Fuel Economy mpg (City/Hwy)
Trenton South Engine Plant, Trenton, Mich.
(a) Meets Federal Tier 2 Bin 5 emission requirements and ULEV II requirements in California, Massachusetts, New York, Maine,
Vermont, Connecticut, Pennsylvania, Rhode Island, New Jersey, Oregon and Washington.
ENGINE: 5.7-Liter HEMI
®
V-8 WITH FOUR-CYLINDER MODE FUEL SAVER TECHNOLOGY
Standard — 300C (RWD/AWD)
90-degree V-type, liquid-cooled with variable-cam timing
(VCT)
345 cu. in. (5654 cu. cm)
3.92 x 3.58 (99.5 x 90.9)
Pushrod-operated overhead valves, 16 valves, eight
deactivating and eight conventional hydraulic lifters, all with
roller followers
Sequential, multi-port, electronic, returnless
To Next Page
Need help?
General
